• Laser@feddit.org
    link
    fedilink
    English
    arrow-up
    64
    arrow-down
    10
    ·
    1 day ago

    I had a phone without before, that one came with a simple cheap passive adapter for USB-C to 3.5mm headset. You lose out on using headphones while charging, but other than that I was never really inconvenienced…

    • ColeSloth@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 hours ago

      That means the audio still goes through another DAC, lowering the sound quality, compared to an analog 3.5 jack. Also, who wants to further risk wearing out\vreaking their charge port, jack inputs almost seem like they can’t break.

    • warm@kbin.earth
      link
      fedilink
      arrow-up
      78
      arrow-down
      5
      ·
      1 day ago

      After having a phone without a 3.5mm port or a microSD card slot, the top 2 features I want on a phone are a 3.5mm port and a microSD card slot.

      Shame Sony discontinued their Xperia 5 series, even if they were also excessively priced.

      • lime!@feddit.nu
        link
        fedilink
        English
        arrow-up
        17
        ·
        edit-2
        1 day ago

        aw man, this is the first i’m hearing about discontinuation. apparently it’s because people want larger phones?!

        i have a 5 IV and it is by far the largest phone i’ve ever owned… i wish it was like an inch smaller. but it was the only model i could find that doesn’t have a non-rectangular screen. these bloody camera cutouts are everywhere and i newer even use the front camera.

        • warm@kbin.earth
          link
          fedilink
          arrow-up
          9
          ·
          1 day ago

          Yep… everyone wants phablets. Apparently.

          I don’t mind the cutouts (if done right), they just sit in the notification bar, so they never obscure anything anyway. That’s a place Sony could have shaved off the extra height imo, the top and bottom bezels are pretty unnecessary.

          We are slowly moving to under-screen cameras now though.

          • lime!@feddit.nu
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            1 day ago

            i mean the bezels together are less than 1cm. and the notch takes space from notifications, with two sim cards and a vpn active that shit overflows instantly anyway.

            • warm@kbin.earth
              link
              fedilink
              arrow-up
              2
              ·
              1 day ago

              Fair, I suppose it depends on how the software handles it too. Personally I never let notifications stack up and the VPN for me is on the other side. I’d personally rather have the shorter phone and a cutout.

              • lime!@feddit.nu
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 day ago

                vpn is on the right, yeah. but this is with just one sim:

                with two i get another signal strength and wifi calling symbol. it’s already collapsing them when not on the quick setting screen, which is very frustrating.

          • idiomaddict@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 day ago

            We are slowly moving to under-screen cameras now though.

            Nothing better than a selfie from a low angle, right?

        • Mandrilleren@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          arrow-down
          1
          ·
          1 day ago

          The Sony form factor is the best on the market IMO. You can hold it in you hand and get more screen in the height.

    • stealth_cookies@lemmy.ca
      link
      fedilink
      English
      arrow-up
      30
      arrow-down
      2
      ·
      1 day ago

      I disagree about this being a good solution. USB-C is not meant to take the strain of being used as an audio port when being used in the go so there is risk of damaging the port while a headphone jack is more stable and allows the plug to rotate. Plus I don’t want to have a dingle I can forget when in a rush.

      • idiomaddict@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 day ago

        They should make cases with the adapter built in, the way they used to (still do?) for external battery packs.

    • tigeruppercut@lemmy.zip
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 day ago

      I have a tablet that came with a C to 3.5 adapter and it worked well enough for a bit but soon enough it was only intermittently allowing the headphone connection to work, with a message about the port being dirty or something. Yet I could go right from unplugging that and putting the charger in and it worked fine.

      There’s just no substitute for a dedicated port, especially when it barely takes up any room

      • Badabinski@kbin.earth
        link
        fedilink
        arrow-up
        10
        arrow-down
        2
        ·
        1 day ago

        I use one of those daily and god they’re all terrible. They’re huge and they all break really easily. My phone is fucking huge, just give me a built in headphone jack!

      • hcbxzz@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 day ago

        fast charging / USB-PD may not work, and 3.5mm media controls may not pass through properly

    • Panties@lemmy.ca
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      1
      ·
      1 day ago

      It’s really a small inconvenience, but using an adapter would mean I’d be prone to misplace it when I use my headphones on anything else, so it hardly makes anything better

      • Laser@feddit.org
        link
        fedilink
        English
        arrow-up
        11
        arrow-down
        6
        ·
        1 day ago

        The reason for not using a headphone jack is making it simpler for the manufacturer, one less connector to handle which also limits how slim a phone can be.

        I’m not saying this is good for the consumer, but there are reasons for integrating the functionality into the USB-C port.

        • Ulrich@feddit.org
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          20 hours ago

          one less connector to handle which also limits how slim a phone can be.

          The headphone jack is 3.5mm. iPhones are ~7.5mm thick, more than double. The smallest phone available on the market is 4.2mm.

        • shaggyb@lemmy.world
          link
          fedilink
          English
          arrow-up
          23
          arrow-down
          3
          ·
          1 day ago

          For $700 I’m not interested in compromising my own convenience for theirs.

          • Laser@feddit.org
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            1
            ·
            1 day ago

            Fair, though the fact doesn’t exist in a vacuum.

            If you want easily replaceable parts and a system that can unlock the bootloader for example, your argument can be made for 99% of phones on the market. The more requirements you add, the smaller the scope gets until there are no devices left to choose from.

        • hexonxonx@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          10
          arrow-down
          3
          ·
          1 day ago

          These points were all disproved long ago. The jack is a the same thickness as the display.

          The reason is because BT headphones have a much higher margin, and need to be replaced every few years because of the battery (if not already replaced because they were lost or damaged).

          It’s just a dumb cash grab.

        • Ulrich@feddit.org
          link
          fedilink
          English
          arrow-up
          11
          arrow-down
          1
          ·
          1 day ago

          It’s not hard to manufacture a headphone jack. We’ve been doing it since the 80s. Probably costs them a penny BOM.