OpenAI on that enshittification speedrun any% no-glitch!

Honestly though, they’re skipping right past the “be good to users to get them to lock in” step. They can’t even use the platform capitalism playbook because it costs too much to run AI platforms. Shit is egregiously expensive and doesn’t deliver sufficient return to justify the cost. At this point I’m ~80% certain that AI is going to be a dead tech fad by the end of this decade because the economics just don’t work now that the free money era has ended.

I think you’re referring to FlareSolverr. If so, I’m not aware of a direct replacement.

Main issue is it’s heavy on resources (I have an rpi4b)

FlareSolverr does add some memory overhead, but otherwise it’s fairly lightweight. On my system FlareSolverr has been up for 8 days and is using ~300MB:

NAME           CPU %     MEM USAGE
flaresolverr   0.01%     310.3MiB

Note that any CPU usage introduced by FlareSolverr is unavoidable because that’s how CloudFlare protection works. CloudFlare creates a workload in the client browser that should be trivial if you’re making a single request, but brings your system to a crawl if you’re trying to send many requests, e.g. DDOSing or scraping. You need to execute that browser-based work somewhere to get past those CloudFlare checks.

If hosting the FlareSolverr container on your rpi4b would put it under memory or CPU pressure, you could run the docker container on a different system. When setting up Flaresolverr in Prowlarr you create an indexer proxy with a tag. Any indexer with that tag sends their requests through the proxy instead of sending them directly to the tracker site. When Flaresolverr is running in a local Docker container the address for the proxy is localhost, e.g.:

If you run Flaresolverr’s Docker container on another system that’s accessible to your rpi4b, you could create an indexer proxy whose Host is “http://<other_system_IP>:8191”. Keep security in mind when doing this, if you’ve got a VPN connection on your rpi4b with split tunneling enabled (i.e. connections to local network resources are allowed when the tunnel is up) then this setup would allow requests to these indexers to escape the VPN tunnel.

On a side note, I’d strongly recommend trying out a Docker-based setup. Aside from Flaresolverr, I ran my servarr setup without containers for years and that was fine, but moving over to Docker made the configuration a lot easier. Before Docker I had a complex set of firewall rules to allow traffic to my local network and my VPN server, but drop any other traffic that wasn’t using the VPN tunnel. All the firewall complexity has now been replaced with a gluetun container, which is much easier to manage and probably more secure. You don’t have to switch to Docker-based all in go, you can run hybrid if need be.

If you really don’t want to use Docker then you could attempt to install from source on the rpi4b. Be advised that you’re absolutely going offroad if you do this as it’s not officially supported by the FlareSolverr devs. It requires install an ARM-based Chromium browser, then setting some environment variables so that FlareSolverr uses that browser instead of trying to download its own. Exact steps are documented in this GitHub comment. I haven’t tested these steps, so YMMV. Honestly, I think this is a bad idea because the full browser will almost certainly require more memory. The browser included in the FlareSolverr container is stripped down to the bare minimum required to pass the CloudFlare checks.

If you’re just strongly opposed to Docker for whatever reason then I think your best bet would be to combine the two approaches above. Host the FlareSolverr proxy on an x86-based system so you can install from source using the officially supported steps.

My dream was to work as a game developer. This was nearly 20 years ago. I actually got an offer in that field at one point, and the salary was like $20k less than what I was already being paid. I was the main bread-winner in what was a (mostly) single-income household at that time, with my partner pursuing her PhD. Gave up the dream, and I’m glad I did based on what I later learned about that industry. If I went into the game industry I’d be making far less money and have far less free time to do the things I enjoy, like playing the games other people make.

From https://www.githubstatus.com/ (emphasis mine):

We suspect the impact is due to a database infrastructure related change that we are working on rolling back.

If you fuck up the database, you fuck up errythang.

Anything that pushes the CPUs significantly can cause instability in affected parts. I think there are at least two separate issues Intel is facing:

• Voltage irregularities causing instability. These could potentially be fixed by the microcode update Intel will be shipping in mid-August.
• Oxidation of CPU vias. This issue cannot be fixed by any update, any affected part has corrosion inside the CPU die and only replacement would resolve the issue.

Intel’s messaging around this problem has been very slanted towards talking as little as possible about the oxidation issue. Their initial Intel community post was very carefully worded to make it sound like voltage irregularity was the root cause, but careful reading of their statement reveals that it could be interpreted as only saying that instability is a root cause. They buried the admission that there is an oxidation issue in a Reddit comment, of all things. All they’ve said about oxidation is that the issue was resolved at the chip fab some time in 2023, and they’ve claimed it only affected 13th gen parts. There’s no word on which parts number, date ranges, processor code ranges etc. are affected. It seems pretty clear that they wanted the press talking about the microcode update and not the chips that will have the be RMA’d.

One of my grandfathers worked for a telephone company before he passed. That man was an absolute pack rat, he wouldn’t throw anything away. So naturally he had boxes and boxes of punch cards in this basement. I guess they were being thrown out when his employer upgraded to machines that didn’t need punch cards, so he snagged those to use as note paper. I will say, they were great for taking notes. Nice sturdy card stock, and the perfect dimensions for making a shopping list or the like.

He was a raging alcoholic who hid his illness from the medical professionals who examined him as part of his Super Size Me “experiment.” A lifetime of booze did way more damage than 30 days of McDs possibly could.

I haven’t actually tried the new ones, I probably should do that before I slander them. The Harvest Cheddar ones were so good though. I haven’t seen them in at least a few years, unfortunately.

I noticed that Miss Vickie’s has a new sour cream something or other flavour in a bag that’s the same colour, or nearly so. Every time I go through the chip aisle I get very excited for a second, then I realize it’s not actually the Harvest Cheddar and my hopes are dashed. I’m developing an irrational hatred of those impostor chips.

The image on the right is a fake. If dude could grow a beard that looked anywhere near that good, he would’ve done it years ago.

Jesus, what a bunch of needless “security”

I disagree with this part. Ticket theft is an actual issue, there are lots of ways to get a copy of someone else’s barcode and either use it before they do or (more likely) sell it to someone else online. TicketMaster’s marketing is talking up the increased security to distract from their true purpose, which is of course to find more ways to take more money from fans. Of course it’s debatable whether the increased security is worth the decreased convenience for ticketholders. That is the inevitable tension when it comes to security, where any increase in security always incurs at least some cost in terms of convenience.

This is all for personal data mining.

TicketMaster might be selling user data, but I don’t think that’s their main aim. They want control of the resale market so they can take a cut when tickets are resold. Note how they don’t allow direct transfers between two mobile wallets, they only allow transfers using their app. That’s so they can monitor transfers. If they see someone transferring dozens or hundreds of tickets to many other TicketMaster users then that person is likely reselling and they can clamp down on their account. TicketMaster’s true intent is to force all resales onto their ticket marketplace, because that’s where they get to take a cut of resales.

Oh yes, I don’t mean to absolve them of any blame. They treated it as an expensive lesson, which is probably the best way for them to process it.

Also while TicketMaster is going to sell this as being an “enhanced security” thing, it’s pretty obvious that increased security is only a side benefit for them. Their angle in this is getting more control over the tickets they sell. As long as there are many people who want to go than can physically fit in a venue, there will be a reselling market for event tickets. TicketMaster wants to take a cut of these downstream transactions.

While the security of rotating barcodes does hinder outright scams, mobile wallets normally allow wallet users to transfer items like tickets to another user if the ticket issuer allows it. TicketMaster does not allow this for their tickets, of course, because it could allow someone to resell tickets while cutting TicketMaster out of the transaction. Currently TM allows transfers using their app, but I’m sure they monitor usage of the feature and clamp down on anyone transferring many tickets. In other words if you try to resell in bulk without using TicketMaster’s own platform (where they get to take a cut), they drop the hammer on you.

The reason you can’t use screenshots or printouts is because they’re now using rotating barcodes. Much like the rotating codes in an authenticator app, the number values behind the barcode are changing on some regular cadence. Only the most recent barcode value is considered valid.

The only other option is to use a mobile wallet, but that prevents me from sending my friends their tickets, since I purchased them all together.

Some ticket sellers allow you to transfer tickets from one wallet to another wallet, but of course TicketMaster isn’t one of them because they’re fucking TicketMaster. What TicketMaster does allow is transfers from one TicketMaster account to another. Of course then everyone needs to have a TicketMaster account, needs to have the app, etc. It’s either that or leave all the tickets in your app or wallet and go in together. If you tell the door person “I have the tickets for these X people,” they’ll be able to handle that.

Yes because the security of barcodes and screenshotted tickets were such a huge problem before.

I think what you just described is actually a problem. Friends of my parents were visiting somewhere, bought tickets to a show from a reseller, met up with the seller (normal looking guy, no red flags, gave some plausible story why he was selling) and paid cash for printed out tickets with barcodes. Printouts looked legit, dates on the printouts were correct, etc. Went to the doors, tried to scan their tickets, got told that unfortunately they’d just been scammed. The impression they get from the box office worker is that this sort of bad news is something they’ve had to deliver frequently. Anecdotal, but I doubt those friends of my parents were the only ones to get scammed in this way. TicketMaster still sucks as an organization but the extra security of rotating barcodes does serve a legitimate security purpose, just like the rotating security codes generated by an authenticator app.

Airlines have recently been having problems with stowaways using screenshots of boarding pass barcodes or QR codes too. Such stowaways should get caught before departure by passenger headcounts or boarding ID checks, but clearly there are gaps or breakdowns in these procedures because some of these stowaways are getting caught at the destination. Others may have successfully flown for free. If it keeps happening I bet we’ll see rotating barcodes come to mobile boarding passes too, if that hasn’t already happened.

Elon broke the seal on firing huge swaths of a tech workforce to make your numbers look better.

Don’t give him too much credit, it’s hardly the first time the tech sector has gone through this cycle. Elon had to do it because he massively overpaid for Twitter. The fact that his layoffs came at the front of this wave is probably just coincidence.

People here seem partial to Jellyfin

I recently switched to Jellyfin and I’ve been pretty impressed with it. Previously I was using some DLNA server software (not Plex) with my TV’s built-in DLNA client. That worked well for several years but I started having problems with new media items not appearing on the TV, so I decided to try some alternatives. Jellyfin was the first one I tried, and it’s working so well that I haven’t felt compelled to search any further.

the internet seems to feel it doesn’t work smoothly with xbox (buggy app/integration).

Why not try it and see how it works for you? Jellyfin is free and open source, so all it would cost you is a little time.

I have a TCL tv with (with google smart TV software)

Can you install apps from Google Play on this TV? If so, there’s a Jellyfin app for Google TVs. I can’t say how well the Google TV Jellyfin app works as I have an LG TV myself, so currently I’m using the Jellyfin LG TV app.

If you can’t install apps on that TV, does it have a DLNA client built in? Many TVs do, and that’s how I streamed media to my TV for years. On my LG TV the DLNA server shows up as another source when I press the button to bring up the list of inputs. The custom app is definitely a lot more feature-rich, but a DLNA client can be quite functional and Jellyfin can be configured to work as a DLNA server.

First off, good job on quitting! Keep up the good work.

Alcohol withdrawal can apparently cause high blood pressure. Withdrawal typically peaks in the first 1-3 days, which would match up with your observation that your BP was even higher at the 72-hour mark:

In the most severe cases, alcohol withdrawal should be supervised by a medical professional because it’s actually possible to die from it. If you’d gone through full-blown worst-case alcohol withdrawal, you’d probably know it (and high BP would probably not be your most pressing concern). Maybe it’s possible to get a milder case of alcohol withdrawal from a lesser level of alcohol use? That’s pure speculation on my part, I can’t find any source one way or the other as most are devoted to withdrawal from heavy alcohol abuse. If I were in your shoes I’d monitor my BP for the next couple weeks and talk to a doctor if BP measurements aren’t trending downward over that time.

You can do this with custom formats. You’d want to create a custom format that gives a score if the file is below a certain size threshold (say 1.5GB per hour), then add minimum custom scores to the release profiles you use (e.g. Bluray 1080p). You can also add custom filters for release groups that prioritise file size. YTS for example keeps their releases as small as possible.

I’m not convinced that Valve will go down the tubes when Gabe shuffles off this moral coil (praise gaben may he live a thousand years). It would require a strong company culture that believes as he does that piracy is a service issue and is thus willing to adhere to his vision in his absence, but that can happen in a privately held company if there’s a strong succession plan in place.

Now, if Gabe dies and Valve goes public, then it’s pretty much over. Platform monetization, proft-taking and short-term thinking would enshittify Steam in short order.

Commerce conducted in a capitalist economy is inherently capitalist. Being publicly traded is not strictly required, though it might be the most common form of corporate structure under capitalism. Individuals, partnerships, privately-held and publicly-traded companies can all own capital. Valve’s assets are not owned by a government, its business decisions are made privately and it operates in a free market. Those three factors are pretty much the definition of capitalism.