This is the second time I try to unbrick my device (asus X00PD) with my computer (Ubuntu 23.10) and Im not very smart, so I hope you are patient.

Turns out I can log in to fastboot mode on my device and my computer recognizes the device through fastboot:

fastboot devices
KCAJJFOES633VUN    fastboot

I’m following these instructions: https://xdaforums.com/t/fastboot-edl-unbrick-asus-zenfone-max-m1-asus_x00pd-ww_x00pd-zb555kl-zb556kl.3874245/, Method 2:- Flashing Raw Firmware In Fastboot Mode.

I downloaded https://drive.google.com/folderview?id=10rvsIsw3pZ78Lg8eMdrgsvBqujRrreNj, (raw firmware) and extracted it. Inside this directory there are 2 .bat files: 8937.bat for Snapdragon 430, the one I need for my device and 8917.bat for Snapdragon 425. There is also a .sh file (I work with ubuntu): fastboot.sh

I don’t know how to run the .bat file I need on a ubuntu terminal. I also run ./fastboot.sh, but that only rebooted the device into an on and off loop.

How should I proceed?

  • Mojojojo1993@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    11 months ago

    Think it would work or a raspberry pi ? I just downloaded the standard fastboot and adb files. I have the correct drivers as I downloaded the nexus 7 ones. Laptop recognizes tablet. I can access the internal files and get the security message. Terminal gives me error message

    Doesn’t understand adb as command. In yellow font. After the first word it changes back to white font. I can’t run adb devices as it won’t run any command.

    Was thinking might be work laptop with firewall preventing debugging.

    • d3Xt3r@lemmy.nz
      link
      fedilink
      English
      arrow-up
      3
      ·
      11 months ago

      work laptop

      Ah, that explains it. There’s a lot of stuff that enterprises do to restrict such stuff.

      A Raspberry Pi should work just fine.

      • Mojojojo1993@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        Sweet. Do I need anything extra for a pi. I know from previous tinkering they had miniscule storage. Would I need new drivers and such ?

        • d3Xt3r@lemmy.nz
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 months ago

          No need for any drivers. You just need to install android-sdk-platform-tools, assuming you’re running Raspbian or similar the command would be sudo apt install android-sdk-platform-tools.

          After that, type fastboot and/or adb and see if they work.